Gin Genie Race 5 v2

Technical data

• Cockpit total size 34cm x 15cm (flight panel smaller but fits most modern instruments)

Size chart

Package

• 2x 30mm carabiner
• 2x rescue bridle
• 3 step asymmetric speedbar
• 2x inner containers + rescue handle
• 3x foot pads (2.5cm / 5cm / 7.5cm)
• Gin stickers

Optional extras (Related Products)

• Reserves
• Helmets
• Bags
• Connectors
• Harness Spares
• Clothing

Genie Genie Race 5 v2: UNLEASH YOUR POTENTIAL

2025 updates

1. Aerocone height – Covering the head of the pilot
2. Magnetic zipper for the main opening
3. 40mm Ronstan ratchet pulley. With easy replacement system
4. G-Chute pocket. With carabiner attachment
5. Cockpit pocket. Updated with zipper compartment
6. Nose material. Updated sturdier material
7. Asymmetric speedbar design
8. Reinforced nose plate fabric

Performance guaranteed

Wind tunnel testing by Gin Gliders in collaboration with Ulsan National Institute of Science and Technology in South Korea was used to inform the development process and confirm the results of in-flight testing. The Genie Race 5 v2 is built to succeed at the highest levels.

Upgraded inflatable skin

In response to pilot demand, the inflatable skin has been upgraded with several new features.

Updated aerocone

The aerocone has been slightly extended in height to give a closer alignment with the top of the pilot’s head.

Magnetic closing system

The cord-operated zipper has now been replaced by a magnetic system, which is simply opened and closed in the same manner as a classic cocoon. It’s never been easier to get in and out of a fully inflatable race harness.

Body upgrades

Besides the skin upgrade, the body has also been updated from 2025. There is a more robust fabric enclosing the footplate and an upgraded 40mm Ronstan ratchet pulley with easy attach system on the speed line.

G-chute pocket

There is a new pocket on the left side of the chest with an attachment for use with a drag parachute.

Cockpit plate pocket

A secondary cockpit pocket can be fitted underneath the main panel. This contains a hook knife, zipped compartment and extra storage for a battery pack etc. Zipper postion has been updated in order to be able to extract items during flight.

New nose section

The nose section is now shaped with foam and re-enforced with more durable fabric, in order to minimise damage when the harness comes into contact with the ground, for example when moving around on take-off.

New speed bar

An upgraded version of our asymmetric speed bar now features more durable materials and a wider third step for enhanced comfort at full speed.

Upgradable

Besides being standard on the current version of the harness, the new skin can be purchased separately and fitted to the original Genie Race 5.

Easy to set up and to use

The Genie Race 5 v2 doesn’t require complex trim adjustments in order to maintain inflation. It does still offer the ability to adjust the geometry according pilot taste.

Stays inflated at all speeds

Fluttering of the harness is also a loss of performance, and the Genie Race 5 v2 doesn’t flap or flutter, even at trim speed. The plastic reinforcements and uniquely durable yet light fabric allow for a more simplified and streamlined profile.

Keep your cool

The fabric of the Genie Race 5 v2 is also resistant to heat and also has a degree of breathability, which helps to prevent pilot overheating even when fully enclosed.

Your instruments where you need them

The cockpit of the Genie Race 5 v2 is easy to install and still allows the pilot to see and operate their instruments in flight.

Well-proven geometry

The geometry of the Genie Race 5 v2 is an evolution from the Genie Race 4, well- proven in terms of stability and feedback, both in climbs and on glide.

9cm koroyd back protector

The 9cm Koroyd protector is thicker than the minimum required to obtain certification, offering excellent protection for this category of harness whilst contributing to the structure of the harness and the maintenance of a low profile.

Wind tunnel tested

The Genie Race 5 v2 is a product of the “GIN LAB”, a wind tunnel project run by Gin Gliders in collaboration with Ulsan National Institute of Science and Technology in South Korea. The final profile chosen for the Genie Race 5 v2 is the result of in depth investigations of various parameters and comparative testing.

Designer notes

GIN harness designer Ho Woong offers insights on the development of the Genie Race 5 v2.

The goal with the Genie Race 5 was to reach the top level of performance of a fully enclosed harness whilst making the harness easier to use in flight. By using a fabric with more structure, and introducing plastic reinforcements in strategic places, we were able to keep an external profile that’s beneficial for performance as a result of its simple, clean shape and resistance to fluttering and flapping.

Pilot ergonomics are an important factor in comfort and ultimately, performance. So we made everything as easy to use as possible: the cockpit, the system of opening and closing, the trimming. As a result, besides competitors, the harness is also great for the most competitive XC pilots.

Features

• 2 rescue containers (1 on either side)
• 9cm Neo-Koroyd protector
• 30L back pocket with pouches
• routing for a hydration system and radio
• outlet for catheter system (pee tube)
• 2 pockets on vest
• 3L under seat pocket
• 1L flight deck pocket
• 10L ballast container
• 3 step asymmetric speed bar
• 2.5, 5, 7.5cm removable footpad to adjust the length of the cocoon
• shell fabric repair tape available
• 2 x 40mm Ronstan ratchet pulley

Type of practice

Characteristics

Pre-flight preparation

Setting up your harness

Rescue installation

How to pack Gin Genie Race 5 into the rucksack

Gin product registration

Register your Gin product here.

Downloads

See Gin Manuals

GGR5 = Gin Genie Race 5

GR5 = Genie Race 5