Gin Yeti 6

Technical data

SIZE	21	23	25	27
Weight range (kg)	50-75	65-90	75-100	85-110
Extended weight (kg)	75-95	90-105	100-115	110-125
Flat area (m2)	20.80	22.80	24.80	26.80
Flat span (m)	9.96	10.43	10.88	11.31
Flat aspect ratio	4.77	4.77	4.77	4.77
Projected area (m2)	17.85	19.57	21.28	23
Projected span (m)	7.93	8.30	8.66	9.00
Projected aspect ratio	3.52	3.52	3.52	3.52
Chord (m)	2.59	2.71	2.83	2.99
Number of cells	36	36	36	36
Glider weight* (kg)	2.42	2.63	2.76	2.99
Certification	EN A	EN A	EN A	EN A

*Weight with light Dyneema risers. Regular risers: add 200g

Flybubble note: The Gin Gliders' weight specifications are based on the assumption that pilots will switch out the standard Kevlar risers for optional Dyneema risers. However, it is generally recommended for most pilots to stick with the standard risers due to their superior user-friendliness, pulleys, comfortable handles, durability, and dimensional stability, even if they weigh just 200g more.

Sizing guide

Colours

Standard colours: Lemon, Red, Turquoise.

Package

• Inner bag
• Compression strap
• GIN stickers
• Repair kit

Related products (optional extras)

• New Gin's 40L X-Lite rucksack
• New Yeti Compress concertina bag

Yeti 6: ADVENTURE AWAITS!

Compact in the air...

Thanks to the new planform and arc, the wing is agile in the turn whilst remaining highly stable in roll. It has a compact and well balanced feel in the air in all conditions. Lines are a carefully chosen mix of sheathed lines for the lower and mid lines with unsheathed upper lines.

...and on the ground

No stone was left unturned in our quest to minimise weight and packing volume. Nickel titanium (Nitinol) rods are used in place of plastics, and reinforcements on both the trailing and leading edge have been removed or replaced with tapes wherever possible. The internal structure has been further optimised for lower weight and the number of bridle attachment points reduced. All this means a smaller, lighter pack — helping you move fast across the terrain.

First class climbing

Some mountain wings leave something to be desired when it comes to climbing performance. Not so the Yeti 6. The planform, arc, sail tensioning and swept back wing tips all work together to promote flat and efficient turning behaviour. The Yeti 6 can be used for so much more than just fly-downs!

Students welcome

The Yeti 6’s handling was trimmed and tuned with students in mind. The goal was to have a more damped character than its predecessor, whilst retaining enough of the fun factor for more experienced mountain pilots. Brake travel is long and progressive yet has a direct feel, and there is zero tendency to enter a spiral dive in case the pilot inadvertently pulls too much brake. It’s a pleasure to teach with the Yeti 6 and students with an interest in hike ’n’ fly need not look further for a post-school wing.

High wing loading, no problem

The Yeti 6 doesn’t just have an incredibly wide range of possible wing loadings, it also remains stable throughout this range. The EN A rating has been retained even at high wing loadings thanks to the wing’s inherent stability in all axes.

Accommodating take-off behaviour

Thanks to the Yeti 6’s efficient profile the wing rapidly stabilises overhead and produces lift and provides a gentle forward momentum on light wind take-offs. In stronger winds, the wing remains equally well behaved with no hanging back. Whatever your skill level and the terrain, the Yeti 6 will allow the best possible take-off.

Yeti compress bag

Also available for the Yeti 6 is a specially designed compress bag. The Yeti compress bag folds 5 times, ensuring the most compact volume possible and a perfect fit in your rucksack for those fast or long hikes.

40L X-lite rucksack

This 40L rucksack is a perfect match for the Yeti 6 and the Yeti compress bag. Loaded with essential alpinism features such as ice-axe, ski and walking pole holders, drinks pockets, stowage straps and ergonomic shoulder straps, the X-lite rucksack is built for mountain adventure.

Designer notes

Designer Gin Seok Song explains the philosophy of the Yeti 6:

“The Yeti 6 incorporates all our learning from the Yeti 5 and Bolero 7.

Our priority was to combine the climbing performance and all-round ease and stability of the Bolero 7, whilst also retaining the low packing volume and weight of the Yeti 5. The result is basically a wing that is simple to launch and climbs with a flat, efficient turn. At the same time, it offers more performance than its predecessor whilst being also less demanding to fly.

We feel this is a significant step forward that will appeal to a wide range of mountain pilots."

Details

• 3 risers / 3 lines spanwise
• thin, sheathed PPSL Dyneema lower and mid lines with unsheathed upper lines
• Weight saving construction: optimized internal structure, line attachment points and reduced use of tape
• Speed system with Harken pulleys
• Fabric selected for the lightest weight: 27g top and bottom surface
• Also available: additional Dyneema risers (160g)
• Serial 12mm risers with Kevlar webbing, magnetic fastener, low friction ring, Brummel hook, 18mm low friction Harken pulley, separate A3 riser
• Additional riser option: Dyneema slide protect 6mm riser

Gin product registration

Register your Gin product here.

Downloads

See Gin Manuals