Ozone Forza Pod Bungee (for speed system)

Designed for Ozone Forza, Ozium and Ozium 2 pods, but should work with most speedbags.

How to attach it?

Method 1 (no maillons - harder):

1. First, connect the pod bungee cord to end of the speedbag, near the footplate (there is usually a small loop on the speedbag for this), by passing the pod bungee cord back through itself, using one of it's stitched loops on one end.
2. Next, connect the lower speed system webbing strap to the pod bungee cord by passing the whole speed system cord through the other loop of the pod bungee cord. NB: The speed system will need to be disconnected from the harness to be able to do this.
3. Finally, attach the speed system to the harness and adjust everything to suit.

Method 2 (one maillon - easier):

Alternatively, to save having to disconnect the speed system from the harness, you could use a small standard (oval) stainless steel maillon.

Method 2 (two maillons):

If you prefer to avoid having the bungee cutting into the speedbag webbing then you could use two small maillons, one at each end.