Advance ZETA (PAST MODEL)
Select all options to view stock availability
Price to be confirmed Price not yet confirmed. Email [email protected] for info. See our Shipping and Stock page for more info.Model Status: Past model
EN Certification: EN D
ZETA - Freestyle experience
This certified ADVANCE freestyle wing is especially at home with the following figures: Wingover, Helicopter, Fullstall, Tail glide, Looping, SAT, Asymmetric spiral, Twister, Deep stall, McTwist, Misty flip and Dynamic fullstall.
Plenty of fun
A high wing loading results in a high trim speed. Internal pressure is similarly raised, and this again contributes to high dynamic potential. A raised trim speed is an essential advantage for ZETA soaring in that soaring becomes a lot of fun when the wind gets up; and it often does. The wing’s high stability and high ZETA passive safety can be of great value when soaring near the ground.
Excellent performance
A small 21 m2 wing area makes easy work of entering a tight circle. Compared with other products in the category the ZETA has very good climbing and gliding performance. ZETA soaring and thermaling are a lot of fun as well – almost as much fun as freestyle!
Easy takeoff
The ZETA’s design and especially its light weight make forward and reverse takeoffs smooth and easy. The canopy fills quickly and rises evenly, without hanging.
Freestyle with the ZETA
- Wingover
- Helicopter
- Fullstall
- Tail glide
- Looping
- SAT
- Asymmetric spiral
- Twister
- Deep stall
- McTwist
- Misty flip
- Dynamic fullstall
Technical Data
|
Flat surface |
m2 |
21.0 |
|||
|
Projected wing area |
m2 |
17.6 |
|||
|
Recommended takeoff weight * |
kg |
60-110 |
|||
|
Glider weight |
kg |
4.4 |
|||
|
Aspect ratio flat |
|
5.15 |
|||
|
Trim speed ** |
km/h |
38-43 |
|||
|
Max. acceleration |
km/h |
+13 |
|||
|
Certification |
|
EN / LTF D |
|||
* pilot, wing, equipment
* depending on takeoff weight
Materials
|
Leading edge |
Skytex 38 Universal 9017 E25, 38 g/m2 |
|
Upper surface |
Skytex 38 Universal 9017 E25, 38 g/m2 |
|
Lower surface |
DOMINICO DOKDO-20MF, 34 gr/m2 |
|
Supported ribs |
Skytex 40 Hard 9017 E29, 40 g/m2 |
|
Unsupported ribs |
Skytex 40 Hard 9017 E29, 40 g/m2 |
|
Leading and trailing edge reinforcement |
Polyester laminated 20 mm |
|
Lower leading edge reinforcement |
Polyamid 16 mm |
|
Suspension lines |
Edelrid Aramid 7343-280/230/190/140, covered, 1.8 / 1.7 / 1.5 / 1.3 mm (Base lines) |
|
|
Edelrid Aramid 8000/U, 90/70/50, uncovered, 0.8 / 0.7 / 0.5 mm (Upper storey) |
|
|
Liros Dyneema, DSL 70 / DFL 115, covered, 0.95 / 1.3 mm (Brake lines) |
|
|
Liros Dyneema, DFLP 232, covered 1,9 mm (brake lines) |
|
Schraubkarabiner / Leinenschloss |
Maillon Rapide, Inox stainless, 3.5 mm S12 |
Test reports
Testreport EN
Testreport LTF
Downloads
ZETA Cap
Every ADVANCE ZETA comes with a new and exclusive ZETA cap!
Optional Extras
Acro bars, known as Alu-Handles, are available as an option. These handles make it easier to apply just the right forces required for freestyle manoeuvres. You fix them at the eyelets on the brake handles.
| Condition | New |
|---|---|
| EN Certification | EN D |
| Model Status | Past model |
