Gin Switch 2

Technical data

Package

• 1 Harness
• 1 Main reserve handle and inner container (100g)
• 1 Main reserve bridle (75g)
• 2 Gin 30mm carabiners (130g)
• 1 Speedbar (2 step) (100g)

Optional extras (Related Products)

• Reserves
• Drag Parachutes
• Bridle Hook Knives
• Flight Decks (Cockpits)
• Radio, Camera & Phone Holders

Switch 2: Expand your horizons

The Switch 2 knows no boundaries — it’s suitable for everyday, hike ‘n fly, schooling, tandem passengers, mini-wings and travelling. It has full safety features and is comfortable enough to fly all day with.

Geometry: ABS x split legs

The innovative geometry of the Switch 2 combines the advantages of split legs with those of a seat plate. Split legs allow for compact storage, manoeuvrability on take-off and make it simple to get seated in the harness once airborne. Whilst traditional split legs geometries require a different piloting technique due to the independent movement of the legs, this is not the case with the Switch 2. As the leg supports are connected, the harness naturally damps the movements of the air. Even beginners will feel equally at home with the Switch 2 as with a traditional seat plate harness.

Premium triple lock buckles

The Edelrid triple lock buckle is a new premium buckle that’s simple to open and close, yet is highly secure. Even if the release button is accidentally pressed, the snap fastener remains hooked into the frame, making it “semi-automatic”. The load bearing elements are made of a KTL-coated high-strength steel alloy, and the plastic case and snap fasteners are made of an impact-resistant, glass fibre reinforced polyamide.

One size fits all [most]

The Switch 2 is simple to adjust for all pilot sizes. This makes it ideal for use with students in a school or tandem passengers.

Minimum weight, maximum durability

Thanks to lighter but more durable materials and a more efficient construction, we have achieved a low weight whilst retaining an excellent level of durability. The main body of the harness is made from a new 70D melange — a light, durable nylon/polyester fabric that also maintains its cosmetic appeal even when dusty or scratched.

Underseat reserve

The underseat reserve incorporates shoulder attachment points. Zipper bridle tunnels for the reserve bridles offer superior opening, a neat appearance and reduced drag.

Airbag with front inlet

The airbag has a pre-inflation system with titanium and a thin foam layer, guaranteeing full inflation within a few seconds of launch. The air inlet is at the front, enhancing durability and ensuring smooth inflation and a clean profile.

Designed to be lived with

The rucksack features an ergonomic back with foam padding for hike ‘n fly comfort. A unique double-skin feature protects the harness fabric during transportation.

Bias bound seams

Internal seams are finished with bias binding to extend the lifetime of your harness.

Harness details

• T-lock anti-forget buckle system with new Edelrid semi-automatic buckles
• Highly effective pre-inflation system (Titanium wire and thin foam layer)
• Neoprene covered shoulder straps for clean, aerodynamic fit
• Colour coded regulation straps and carabiner loops
• Zipped reserve bridle tunnel for easy closing, clean shape and prevention of mistakes
• Optional radio pocket attaches to either shoulder strap and is equipped with a hook knife
• Back pocket for storage of personal effects or light accessories

Rucksack details

• 7.5L reserve compartment volume
• 80L capacity
• Ergonomic back support with load distribution system
• Lighter but more durable water repellent main fabric also maintains its cosmetic appeal even when dusty or scratched
• Bottom part reinforced by 210D baby ripstop
• Chest and waist straps
• Reflector panel