Skywalk POISON3 (PAST MODEL)

Feed the Performance

POISON3 by skywalk Paragliders 

Performance without regret - the POISON3 was certified without the help of folding lines. 

The "flyable performance" - that's what important with high performance gliders. The EN-D certified POISON3 is easy to launch, thanks to its low weight. Responsible for this low weight are the aluminum material AEROFABRIX [AL]32, the rigid foil elements and the 3-line technology with race lines, and individual line attachment points. The risers are based on a new concept designed to support performance-oriented flying.

The speed bar sets the wing geometry just right when pressed and you can feel the increasing stability as you speed up. In extreme situations, its behaviors is quite manageable for a glider in this category. The reactions of the POISON3 are controllable - the pilot remains the pilot and doesn't become the passenger. At the same time, you feel its high performance qualities due to its high aspect ratio and dynamic handling. 

2 Plus 2 

For all gliders purchased after July 1, 2007, Skywalk offers its customers the skywalk 2 + 2 Guarantee - an additional warranty that goes beyond the minimum required by law. 

Jet Flaps

By narrowing the cross section of the slit (channel), Jet Flaps create a Venturi effect that accelerates the airflow. The air is redirected from the lower sail (pressure area) to the upper sail (suction area) where it exits. Airflow separation is delayed, the stall occurs later, minimum speed is reduced, and the pilot has more angle of attack reserve. This is a considerable benefit during critical phases like launch, landing and tight thermals. More information

Aerofabrix AL32

Developed by skywalk, this ultra light (32 g/sqm) material is coated with an additional aluminum vaporization process. The metallic layer blocks and reflects nearly 100% of damaging UV rays to extend the longevity of your glider. 

3 Line Levels 

True 3-line technology with greatly reduced drag for more performance and easier line sorting. Three line levels from the risers to the wing without line junctions.

Rigid Foil 

The leading edge is reinforced with flexible nylon battens.The result is a substantial weight savings that positively affects the handling in extreme conditions. The Rigid Foil technology gives that the leading edge maintains an optimal shape to ensure even airflow over the wing and a constant ram air pressure. The wing glides better, especially in accelerated flight. During launch, the battens hold leading edge open, making inflation a snap. 

Race Lines 

For performance-oriented gliders, skywalk uses mostly unsheathed Aramid lines with high strength values that are relatively kink and stretch resistant. The result is reduced drag for more performance and better gliding. 

Double Splice Technology 

Fur a perfect connection between the lines, short line segments are spliced in at the ends where the line loops and crossovers are located. With this elaborate process, skywalk increases the durability of the connections.

Downloads

• Skywalk Poison 3 - Leaflet
• Skywalk Poison 3 - User Manual
• Skywalk Poison 3 - Speed Bar Installation Guide
• Skywalk Poison 3 - Thermik Magazine Test Report

Technical Data