Supair Carbon Footplate

Supair have made the Carbon Footplate for all Supair paragliding pod harnesses. The footplate is designed only for Supair pod harnesses; it may not fit other harnesses.

Which size footplate should I order for my Supair pod harness?

Order the Supair Carbon Footplate size to match the size of your Supair pod harness, as follows:

• Harness size S = footplate size S-M
• Harness size M = footplate size S-M
• Harness size L = footplate size L-XL
• Harness size XL = footplate size L-XL

Supair product codes:

• SM size: MPPL010
• L-XL size: MPPL024

Flybubble note: Carbon plates are very strong but not unbreakable. If you apply too much force on one (e.g. when performing high G manoeuvres, pressing too hard with your feet or compressing the harness into your backpack) then you may crack or break it. Cracked carbon is very abrasive and can cause serious damage to both your gear and you. If you inadvertently break or crack your carbon plate then you should not continue to use it. You should replace it with a new one as soon as possible. If you decide to continue using your harness (at your own risk) while you wait for your new carbon plate to arrive then as a temporary emergency solution you could cover the carbon plate in plenty of gaffer tape or duct tape, to reduce the chances of damage to your gear or you. Any sharp edges on carbon plates should be covered in plenty of gaffer tape or duct tape, especially if they come into contact with any critical webbing straps e.g. the leg straps or the harness frame straps.