Maillon Rapide Square Stainless Steel 7.0mm


Product code: MAILR-SQR-SS-7.0MM

Stock status. Shipping estimate from item in stock. In stock, shipped 24-72h

1-3 workdays

Status: Current model

Condition: New

This Maillon is suitable for single point attachment between the harness and the reserve. This Maillon is also suitable for attachment of the tandem paraglider to the tandem paraglider reserve. This Maillon can be also used for attaching the harness to the risers. However, we would generally recommend that you rather use suitable Karabiners for harness to riser attachments. This Maillon can be also used for attaching the two harness reserve shoulder straps to the two ends of the reserve bridles, however we would generally recommend using two 6.0 mm Maillon Rapide Square or Trapezoidal Stainless Steel Quick Links. The best strength/weight connector on the market, manufactured in France by Peguet.
  • Shape: Square
  • Material: Stainless Steel
  • Diameter: 7.0mm

Full specifications can be found on the Peguet Maillon Rapide website.

NOTE: Steel maillons are stamped with a "Working Load Limit" (WLL) corresponding to 20% of their minimum breaking strength (BL). The WLL is the maximum load the manufacturer guarantees will not deform the maillons, allowing opening of the screw closure with fingers.

WARNING: When using steel maillons, double-check and triple-check that they are screwed shut properly as part of every pre-flight check. Tightening should be done with fingers. A spanner may be used carefully, just give them a 'nip'. DO NOT OVER-TIGHTEN as this will weaken the maillon! Threadlock compound or liquid is not recommended.

Additional Information

Condition New
Shipping Details 1-3 workdays
Model Status Current model

Only registered users can write reviews. Please, log in or register