Maillon Rapide Square Stainless Steel 6.0mm

£11.00 Excl. Tax: £9.17
19 in stock 19 in stock In stock and ready to ship. See our Shipping and Stock page for more info.

When in stock, UK approx 2-5 workdays, other countries see shipping page

Model Status: Current model

This maillon is suitable for attaching the two harness reserve shoulder straps to the two ends of the reserve bridles, using two maillons. The best strength/weight connector on the market, manufactured in France by Peguet.

This maillon can be used for attaching the harness to the risers however we would recommend that you rather use suitable Karabiners for harness to riser attachments.

This maillon is not suitable for single point attachment between the harness and the reserve, or for any attachment for tandem paraglider or tandem reserve.

  • Shape: Square
  • Material: Stainless Steel
  • Diameter: 6.0mm

Full specifications can be found on the Peguet Maillon Rapide website.

NOTE: Steel maillons are stamped with a "Working Load Limit" (WLL) corresponding to 20% of their minimum breaking strength (BL). The WLL is the maximum load the manufacturer guarantees will not deform the maillons, allowing opening of the screw closure with fingers.

WARNING: When using steel maillons, double-check and triple-check that they are screwed shut properly as part of every pre-flight check. Tightening should be done with fingers. A spanner may be used carefully, just give them a 'nip'. DO NOT OVER-TIGHTEN as this will weaken the maillon! Threadlock compound or liquid is not recommended.

More Information
Condition New
Shipping Details When in stock, UK approx 2-5 workdays, other countries see shipping page
Model Status Current model