Aircotec XC-TrainerEasy+ (PAST MODEL)
Barogram & Compass display
Thermal & Windcurve display
In addition to the XC-TrainerEasy:
> Temperature sensor
> Temperature gradient
> Wind direction pointer in flight direction (TrackUP)
20 channel parallel, 2D/3D position (WGS 84),altitude, speed, direction, internal aerial.
-1000m to +8200m, resolution 1m. At launch the GPS module provides an automatic altitude setting (AMSL).
Digital indication from –90.0m/s to +90.0m/s Analogue indication from 0 to 5m/s and from 5 to 9,5 m/s. Acoustic signal for climbing initiates at +0.1m/s. This may be switched off. Acoustic signal for sink can be set to initiate between –0.1m/s and –5m/s. Settings in MENU/SETTINGS/VARIO From –5m/s a sink alarm will be heard regardless of settings.
Flight recording in UTC. Display shows local time and elapsed time since launch.
Flight data: 18 hours every second, 6 editable waypoints.
USB for charge, speed, PC.
Rechargeable Li-Ion 3.7V/1800mAh. Operating time per charging app. 40 hours. The instrument is equipped with an “intellicharge” system. To protect the Li-Ion battery the XC-Trainer will shut itself down when before the battery is completely flat, saving all flight data beforehand.
Speed (Only with speed sensor connected):
0 – 160km/h Total-Energy-Compensation (TEC) 0 – 90%
137 x 66 x 28 mm, weight including battery 150g.
The integrated flight recorder saves position, altitude, clinb/sinkrate, SOG and heading every second for up to 18 hours.
6 editable waypoints can be stored.
Barogram & Compass display:
Windspeed, SOG, Altiude, Digital Vario, Barogramm, Gleide angle, Course Over Ground indicator (track off), Distance to chosen Takeoff, Way point or MARK, Clock, Compass, Wind direction.
Thermal & Wind-curve display:
Windspeed, SOG, Altiude, Digital Vario, Speed discription curve, Visualised thermal, Distance to chosen Takeoff, Way point or MARK, Elapsed time flight, Direction to chosen Takeoff, Way point or MARK (track off), Wind direction.
Windspeed, SOG, Direction to chosen Takeoff, Way point or MARK (track off), Gleide angle, Altiude, Digital & Analog Vario, Alt 0, Vario averager for the last 10,20 or 30sec, Distance to chosen Takeoff, Way point or MARK, Clock, Wind direction.
Aircotec XC-Trainer Series Comparison Table
See Aircotec's XC-Trainer series comparison table on the Aircotec website.
Download the latest version of the XC-TrainerEasy+ Manual from the Aircotec website.
Download the latest Aircotec software for the XC-TrainerEasy+ from the Aircotec website.
The XC-TrainerEasy+ comes with the following as standard:
- Charger 100-230 AC (European plug)
- USB cable
- Carry bag
- TN-Complete software, with license
The standard package does not include a PG or HG mount.
- Aircotec XC-BH - Paragliding Leg Mount for XC Trainer
- Aircotec XC-GZH - Paragliding Harness Mount for XC Trainer
- Aircotec XC-DH - Hang Gliding Mount for XC Trainer
|Model Status||Past model|