Aircotec XC-TrainerPro (PAST MODEL)
1. Groundspeed (SOG)
Thermal & Windcurve display
1. Vario Volume adjusts in four steps
Logbook: Year overview
1. Current date
Logbook: flight overview
Logbook: flight detail
20 channel parallel, 2D/3D position (WGS 84),altitude, speed, direction, internal aerial.
-1000m to +8200m, resolution 1m. At launch the GPS module provides an automatic altitude setting (AMSL).
Digital indication from –90.0m/s to +90.0m/s Analogue indication from 0 to 5m/s and from 5 to 9,5 m/s. Acoustic signal for climbing initiates at +0.1m/s. This may be switched off. Acoustic signal for sink can be set to initiate between –0.1m/s and –5m/s. Settings in MENU/SETTINGS/VARIO From –5m/s a sink alarm will be heard regardless of settings.
The sensor is placed on the right hand side of the instrument. It measures in centigrade from –25 to +75 degrees, resolution 0.1 degrees.
Flight recording in UTC. Display shows local time and elapsed time since launch.
Flight data: 145 hours every second, 224 waypoints, 10 routes
USB for charge, speed, PC / infrared
Rechargeable Li-Ion 3.7V/1800mAh. Operating time per charging app. 40 hours. The instrument is equipped with an “intellicharge” system. To protect the Li-Ion battery the XC-Trainer will shut itself down when before the battery is completely flat, saving all flight data beforehand.
Speed (Only with speed sensor connected):
0 – 160km/h Total-Energy-Compensation (TEC) 0 – 90%
137 x 66 x 28 mm, weight including battery 150g.
The integrated flight recorder saves position, altitude, clinb/sinkrate, SOG, heading and temperature every second for up to 145 hours.
224 waypoints sorted in 14 lists with 16 waypoints each.
10 routes each with up to 16 turnpoints.
Groundspeed (SOG), Altiude, Climp/sink rate, upwind / downwind, SOG, LOW BATT symbol, Pilot position, CTR Airspace, Distance to chosen WPT, Mark or to the launch, Local time, Show track, Position Mark, WPT Cylinder depiction, Waypoint, TAS, Speed distribution curve, Windspeed.
Thermal & Windcurve display:
Windspeed, SOG, Altiude, Vario, Vario averager, Speed discription curve, Visualised thermal, Distance to chosen Takeoff, Way point or MARK, Elapsed time flight, Direction to chosen Takeoff, Way point or MARK, Wind direction.
Windspeed, SOG, Direction to chosen Takeoff, Way point or MARK, Gleide angle, Altiude, digital and analog Vario, Alt 0, Vario averager, Distance to chosen Takeoff, Way point or MARK, Local time, Wind direction.
Horizontal line 500m above the pilot, Line des adiabaischen TEMP (-1°C/100m), Pilot position, Barogramm, Thermogram, Horizontal line 500m beneath the pilot, temperature, Local time, Vario averager 30s.
XC-Trainer Series Comparison Table
See Aircotec's XC-Trainer series comparison table on the Aircotec website.
Download the latest version of the XC-TrainerPro Manual from the Aircotec website.
Download the latest Aircotec software for the XC-TrainerPro from the Aircotec website.
Delivery: Instrument, USB cable, charger (euro plug), case, TN Complete license, printed manual, CD.
The standard package does not include a paragliding or hang gliding instrument mount. These can be ordered from us separately.
- Aircotec XC-BH - Paragliding Leg Mount for XC Trainer
- Aircotec XC-GZH - Paragliding Harness Mount for XC Trainer
- Aircotec XC-DH - Hang Gliding Mount for XC Trainer
- Aircotec XC-Trainer Car Charger USB
|Model Status||Past model|