Maillon Rapide Square Stainless Steel 5.0 mm

21 in stock 21 in stock

When in stock, UK approx 2-5 workdays, other countries see shipping page

Model Status: Current model

SKU
MAILR-SQR-SS-5.0MM
For those seeking to save every gram, this Maillon is suitable for attaching the harness to the risers. However, we would generally recommend that you rather use suitable Karabiners for harness to riser attachments. The best strength/weight connector on the market, manufactured in France by Peguet. This Maillon is not suitable for single point attachment between the harness and the reserve, or for any attachment for tandem paraglider or tandem reserve.
  • Shape: Square
  • Material: Stainless Steel
  • Diameter: 5.0mm

Full specifications can be found on the Peguet Maillon Rapide website.

NOTE: Steel maillons are stamped with a "Working Load Limit" (WLL) corresponding to 20% of their minimum breaking strength (BL). The WLL is the maximum load the manufacturer guarantees will not deform the maillons, allowing opening of the screw closure with fingers.

WARNING: When using steel maillons, double-check and triple-check that they are screwed shut properly as part of every pre-flight check. Tightening should be done with fingers. A spanner may be used carefully, just give them a 'nip'. DO NOT OVER-TIGHTEN as this will weaken the maillon! Threadlock compound or liquid is not recommended.

More Information
ConditionNew
Shipping DetailsWhen in stock, UK approx 2-5 workdays, other countries see shipping page
Model StatusCurrent model
Write Your Own Review
You're reviewing:Maillon Rapide Square Stainless Steel 5.0 mm
Your Rating
You May Also Like...